What You Need:
- SWB Model A/EXIT bar
- Quick-release brackets and hardware (included)
- Power drill with Phillips bit
- Measuring tape
- Pencil
- Level (optional)
Step-by-Step:
1. Measure the Inside Width of Your Window Frame
- Confirm your window fits within the adjustable range of the bar.
2. Mark the Mounting Points
- Hold the bar in place (lower half or center of the window).
- Mark where each bracket will go.
3. Install the Quick-Release Brackets
- Drill pilot holes if needed (for drywall or wood).
- Mount both brackets securely using the provided screws.
4. Expand and Position the Bar
- Slide the bar to reach both brackets snugly.
- Ensure it sits level and firm within the frame.
5. Connect the Emergency Release Mechanism
- Attach the internal lever system (included).
- Test to ensure it releases smoothly and quickly.
6. Final Check
- Verify the bar is tight and aligned.
- Confirm the emergency lever releases the bar cleanly when pulled.
Total time: ~20 minutes
Compliant. Secure. Peace of mind for families, guests, and landlords.
