Ships to all 50 states(650) 437-1575
SWB Security Window Bars
Telescopic + modular steel window bars

Steel window bars that fit most standard windows.

One telescopic, modular system. No contractor and no custom order — $85 per module, installed in 15–30 minutes with a drill.

  • Ships to all 50 states
  • 1-year limited warranty
  • Quick-release model for bedrooms
SWB Model A telescopic window security bar next to its retail box
Model A · 1 module16″ wide · 35″–65″ tall

15–30 min

DIY install, no contractor

$85

per module, all three models

35″–65″

telescopic height, no cutting

2–3 days

ships from stock

Burglars check for security before they commit.

They favor targets they can enter quickly and quietly. A visible steel barrier on your ground-floor windows takes that option off the table.

422

incarcerated burglars surveyed about how they choose a target

83%

said they try to find out whether a home has security before breaking in

60%

said finding an alarm would make them seek a different target

Source: Blevins, Kuhns & Lee, Understanding Decisions to Burglarize from the Offender's Perspective, UNC Charlotte, 2012. The survey asked about alarms and other deterrents.

Step 1 · Choose

Which window are you protecting?

Three models, one system. Pick by where the bar mounts and who sleeps behind it.

Most popularSWB Model A telescopic window security bar next to its retail box

Wood or vinyl frames

Model A

Heavy-duty telescopic bar that mounts in the window frame. Add modules side by side for any width.

  • Height35″–65″
  • MountingFrame or wall
  • Install15–30 minutes
  • Emergency releaseNo

$85per module

View Model A
Best for masonrySWB Model B wall-mount window security bar next to its retail box

Brick, concrete or stucco

Model B

The same telescopic system with heavy-duty wall anchors for masonry, stucco and uneven surfaces.

  • Height35″–61″
  • MountingWall, masonry anchors
  • InstallUnder 30 minutes
  • Emergency releaseNo

$85per module

View Model B
Quick-releaseSWB Model A/EXIT quick-release window security bar next to its retail box

Bedrooms and sleeping areas

Model A/EXIT

Quick-release bar that opens from inside with no tools or keys. Designed for the IRC R310.4.4 and IBC § 1031.6 egress rules.

  • Height35″–65″
  • MountingWall or frame
  • Install15–30 minutes
  • Emergency releaseYes, from inside

$85per module

View Model A/EXIT

Not sure which one fits? Take the 60-second quiz →

One system · Three models

Telescopic up.
Modular across.

Height
65″
Modules
4
Width
76″
Price
$340

Each module 16″ wide, 4″ between modules, up to 20 side by side. Height 35″–65″ (Model B: 35″–61″).

65″76″

Drag the ● corner to try your window

Step 2 · Size

How many modules do you need?

Each module is 16″ wide, with a 4″ gap between modules. Add them side by side — no center posts, no cutting. Height adjusts by hand from 35″ to 65″.

Measure the clear width, jamb to jamb.

Window taller than 65″ or wider than 116″? Use the full calculator →

48″
12″116″+
  • Modules needed3
  • Estimated price (3 × $85)$255
Continue with 3 modules

Each module is 16″ wide with a 4″ gap between modules. Shipping is quoted per order · same price for all three models.

Step 3 · Install

Installed in three steps.

A tape measure, a pencil and a drill. All anchors for any wall type are in the box.

Model A · in the frame · 1:04
Model B · on the wall · 1:08
Model A/EXIT · opens from inside · 1:08

Illustrative 3D animation of the real installation steps.

  1. 01

    Measure your window

    Take two measurements: clear width, jamb to jamb, and clear height. About 2 minutes with a tape measure.

  2. 02

    Mark and drill 4 points

    Mark the mounting points with a pencil and drill pilot holes. The anchors are included.

  3. 03

    Slide in and tighten

    Insert the telescopic bar, adjust it to your window and tighten the included security screws. Done.

  4. Read the full installation guide →
Model A/EXIT · Fire code

Bedrooms need a way out.

Model A/EXIT has a quick-release built in. From inside, lift the end bar and the module swings open like a door — no tools, no keys. From outside it stays rigid and tamper-resistant.

  1. 1Lift the end bar about 1½″ until its tip clears the bottom plate.
  2. 2Push it outward — the module swings open like a door, about 90°.
Designed for IRC 2021 R310.4.4Designed for IBC 2021 § 1031.6

Always verify your local building code for sleeping areas.

Model A/EXIT swinging open from inside for an emergency exit

Built to keep them out.

Telescopic height

Adjusts by hand from 35″ to 65″. No cutting, no custom fabrication.

Modular width

Connect units side by side to cover wide windows without center posts.

Tamper-resistant screws

Four security screws that can't be removed from outside without specialized tools.

Powder-coated galvanized steel

Matte black electrostatic finish over galvanized steel, for inside or outside.

Frame or wall

Installs on wood, vinyl, masonry or stucco, interior or exterior.

Everything in the box

All hardware and anchors included. Ships in a slim 16″ × 43″ × 1.9″ box.

Bar spacing is 5¼″. SWB bars are designed to prevent unauthorized entry. They are not a child safety device and are not intended to prevent falls from windows.

Questions before you buy

Still unsure? Talk to a person.

(650) 437-1575

sales@securitywb.com

Mon–Fri 8am–8pm · Sat 9am–1pm CT

Can I install SWB bars myself?

Yes. Measure, drill four pilot holes, slide the bar in and tighten the security screws. Most installs take 15–30 minutes with a standard drill, and all hardware and anchors are included.

Will they fit my window?

Height is telescopic from 35″ to 65″ (61″ on Model B). Width is modular: each module is 16″ wide with a 4″ gap between modules, and you add as many as the window needs — up to 20 modules.

Are window bars safe in a fire?

For bedrooms and sleeping areas, choose Model A/EXIT. Its quick-release opens from inside without tools or keys and is designed to meet the emergency-escape rules for bars in the IRC (R310.4.4) and IBC (§ 1031.6). Always confirm with your local building department.

How much do they cost?

$85 per module for all three models — Model A, Model B and Model A/EXIT. A 48″ window takes 3 modules ($255). Shipping is quoted per order.

Are they rust-resistant and durable?

The bars are galvanized steel with a matte black electrostatic powder coat, made for interior or exterior installation.

What warranty do they come with?

Every model carries a 1-year limited warranty.

How does shipping work?

We ship to all 50 states. In-stock models leave in 2–3 days, and shipping is quoted per order.

Ready to protect your windows?

Get a free quote in under 24 hours. No obligation, no pressure.

  • 1-year limited warranty
  • Shipping quoted per order, all 50 states
  • Bulk orders for landlords and property managers

We reply within 24 hours.

Find your bar →